|
FLXTITE AP-1: A super high clarity and high gloss stiffer formulation film, AP-1 is a general purpose, multilayer, biaxially oriented polyolefin shrink film. It is ideal for most display packaging applications, such as chocolate and gift candy boxes, toys, electronics and foods. It is easily electrostatically sealed, as well. It has excellent clarity, good shrinkage, excellent sealing and outstanding tear resistance.
| TYPICAL PROPERTIES |
UNITS |
VALUE |
VALUE |
VALUE |
VALUE |
ASTM TEST |
| GAUGE |
50 |
60 |
75 |
100 |
|
| DENSITY |
gm/cc |
0.92 |
0.92 |
0.92 |
0.92 |
D-1505 |
| YIELD |
sq.in./lb |
60,000 |
50,000 |
40,000 |
30,000 |
|
| ROLL WEIGHT |
lbs./in. |
2.1 |
2.1 |
2.1 |
2.1 |
|
| HAZE |
% |
1.5 |
1.8 |
2.3 |
2.8 |
D-1003 |
| GLOSS, % @ 60 DEGREES |
% |
125 |
125 |
125 |
120 |
D-2457 |
| COEFFICIENT OF FRICTION |
film/film |
0.21 |
0.20 |
0.19 |
0.19 |
D-1894 |
| SHRINK AIR TEMPERATURE |
farenheit |
250-350 degrees |
| FREE SHRINK @250 F |
% |
MD TD |
MD TD |
MD TD |
MD TD |
D-2732 |
|
65 65 |
60 65 |
55 60 |
55 60 |
| MODULUS OF ELASTICITY |
kpsi |
MD TD |
MD TD |
MD TD |
MD TD |
D-882B |
|
46 52 |
45 51 |
44 55 |
42 49 |
| TENSILE STRENGTH |
kpsi |
MD TD |
MD TD |
MD TD |
MD TD |
D-882B |
|
17 17 |
16 16 |
15 15 |
14 14 |
| ELONGATION AT BREAK |
% |
MD TD |
MD TD |
MD TD |
MD TD |
D-882B |
|
100 100 |
105 105 |
110 110 |
105 105 |
| TEAR PROPAGATION |
grams |
6.5 |
10.5 |
13.5 |
19.5 |
D-1922 |
| WATER VAPOR TRANSMISSION RATE |
g/m2/24hr |
19 |
16 |
12.5 |
10 |
E-96 |
| OXYGEN TRANSMISSION RATE |
g/m2/24hr |
6600 |
6000 |
5100 |
3800 |
D-3985 |
| C02 |
g/m2/24hr |
1900 |
1850 |
1800 |
1750 |
D-1434 |
| MINIMUM USE TEMPERATURE |
farenheit |
minus 22 degrees |
| MAXIMUM STORAGE TEMPERATURE |
farenheit |
90 degrees |
| SINGLEWOUND ROLL LENGTHS |
feet per roll |
10,500 |
8,750 |
7,000 |
5,250 |
| CENTERFOLD ROLL LENGTHS |
feet per roll |
5,250 |
4,375 |
3,500 |
2,625 |
| AVAILABILITY |
| SINGLEWOUND ROLL WIDTHS |
inches |
from 10 to 60 |
| CENTERFOLD ROLL WIDTHS |
inches |
from 6 to 32 |
FLXTITE AP-1 Film complies with the requirements of the FDA and USDA as amended, for the packaging of all foods, with the exception of high alcoholic substances, at room temperature or below.
The above values are based on test data believed to be reliable. This data, however, is merely a guide and should not take the place of through testing for each intended use.
SELLER MAKES NO WARRANTY, EXPRESSED OR IMPLIED, CONCERNING THE PRODUCT OR THE MERCHANTABILITY OR FITNESS THEREOF FOR ANY PURPOSE except that the product shall conform to contracted specifications, and that the product does not infringe any valid United States patent.
The Buyer assumes the sole responsibility to determining the suitability of the product for the uses and applications contemplated by Buyer and others. Furthermore, the Buyer assumes all risk and liabilities for results obtained by the use of the product, whether used singularly or in combination with other material, except those relating solely to the use of the product not conforming to the contracted specifications, which non-conformity is not discoverable by Buyer or others. Any suggestion or recommendations made by the Seller concerning uses or applications of the product are believed to be reliable, but Seller makes no warranty or guarantee of results obtained since the condition of the use and application by Buyer and others are beyond Seller's control.
|